Jak připojit kabel k anténě
Připojte koaxiální kabel k anténě. Jestliže používáte venkovní anténu, nasaďte na konektor voděodolný kryt. Pokud máte digitální televizi, připojte druhý konec koaxiálního kabelu přímo k ní. Jestliže vlastníte analogový televizor, zapojte koaxiální kabel do set-top-boxu.
Archiv
Jak nastavit anténní kabel
Natočte anténu předpokládaným směrem k nejbližšímu televiznímu vysílači. V případě, že se budete připojovat přes set-top-box, propojte jej s televizí pomocí SCART nebo HDMI kabelu. Na televizoru spusťte pomocí návodu automatické vyhledávání programů tak, abyste na obrazovce měli i ukazatel síly a kvality signálu.
Jak prodloužit kabel od antény
K dostání jsou v běžných obchodech s elektromateriálem a v obchodních řetězcích. Delší byste si musela nechat udělat od nějakého elektrokutila z koaxiálního kabelu a 2 konektorů. Koupit prodlužovací v obchodě – Datart, Okay, Eloctroworld a jak se všechny jmenují. Kaufland je tímto zbožím bohatě zásoben.
Kam zapojit koaxiální kabel
Jakmile budete koaxiální kabel mít, stačí zapojit jeden konec do anténní zásuvky, případně přímo k anténě, druhý pak do set-top boxu do zdířky pro vstup.
Jak spravne zapojit kabel
Co na to budeme potřebovat Fáze by měla být v zásuvce vlevo. Černý (hnědý) vodič tedy připojíme do svorky, která patří při pohledu na zásuvku zepředu k levé zdířce zásuvky. Na pravou zdířku je připojen vodič modrý a na středový kolík vodič žlutozelený.
Jak nastavit anténu na DVB-T2
Anténu natočíte předpokládaným směrem k nejvhodnějšímu vysílači (nejbližší s minimem překážek). Na propojení antény s přijímačem použijete koaxiální kabel s příslušnými koncovkami. Pokud nemá televizor DVB-T2 tuner, potřebujete ještě set-top-box.
Jak připojit dvě televize na jednu anténu
To máte špatně, napáječ musíte mít před rozbočovačem aby signál šel do obou tv, takhle vám jde jen jedna tv dobře.To znamená anténa+napájení+rozbočovač a pak vám to půjde. Předzesilvač nepotřebujete jen by vám zničil signál.
Jak funguje Datova zasuvka
Technologie powerline využívá existující rozvody, stačí proto připojit adaptéry do zásuvky, spárovat je a připojit k nim počítač, síťový disk, televizor, přehrávač DVD, herní konzoli či jakékoli kompatibilní zařízení se síťovým rozhraním.
Co je to koaxiální
Koaxiální kabel (zkráceně koax nebo koaxiál, též méně přesně anténní kabel) je elektrický kabel s jedním vnějším vodičem ve tvaru válce a jedním drátovým nebo trubkovým vodičem uvnitř. V kabelové síti slouží pro přenos elektromagnetického vlnění o vysokém kmitočtu (signál digitální televize a dat – internetu).
Jak naladit televizi bez antény
Pokud má domácnost více než jeden televizní přijímač, může kombinovat příjem kabelové a zemské digitální televize. Až dosud k tomu potřebovala speciální set top box pro každý přijímač. Nyní si vystačí s běžně dostupným set top boxem nebo novou televizí uzpůsobenou pro příjem DVB-T signálu.
Jak zjistit jestli je kabel pod proudem
Pro měření napětí (ale i odporu, frekvence, prozvánění vodičů) se červený vodič (+) zapojuje do svorky označené V (Ω, Hz). Svorka je obvykle na pravé straně. Pro měření proudu se červený vodič (+) zapojuje do svorky mA (pro malé proudy, svorka jištěna obvykle pojistkou) nebo do svorky A (pro velké proudy).
Jak poznat fází a Nulák
Vodič PEN (nulák) bude mít proti radiátoru téměř nulové napětí (záleží čím to měříte), fáze plných 230V. Pokud nejste elektrikář, pamatujte si alespoň toto: Nulák a fáze vypadají na pohled úplně stejně. Liší se pouze na dotek.
Proč mi nejde naladit DVB-T2
Zkontrolujte anténu, zda nemá zbytečný zesilovač
Tyto však často u vysílání DVB-T2 působí spíše opačně: místo aby signál zkvalitňovaly, ruší ho nebo zcela ničí. Zesilovač tak často působí spíše jako rušič, který „přebudí“ anténu a zdegraduje signál natolik, že jej nelze přijímat. Zesilovač je proto nutné odpojit.
Jak naladit HD programy přes anténu
Televizor DVB-T2/HEVC vám umožní přijímat programy i ve vysokém rozlišení obrazu (HDTV). Stačí jej připojit k anténě a zvolit v "Menu" "Automatické ladění". Přijímač sám najde a uloží všechny televizní stanice v dosahu vaší přijímací antény.
Jak se zapojuje datová zásuvka
Zapojení moderní datové zásuvky je poměrně snadné a v podstatě potřebujete jen kleště na odstřihnutí přebytečných drátků. Postup je stejný jako u krimpování konektoru RJ-45. Po odhalení jednotlivých žil kabelu je nutné jejich pečlivé rozmotání a následné vložení barevných žil do zářezů na konektoru datové zásuvky.
Co přivádí do zásuvky proud
Vše začíná v elektrárně V elektrárnách se vyrábí trojfázový střídavý proud o napětí několik tisíc voltů. Pro přenos na velké vzdálenosti se toto napětí přímo v elektrárně transformuje na velmi vysoké napětí 110 kV, 220 kV nebo 400 kV, přičemž elektrárna je připojena do rozvodné sítě nadzemními vedeními.
Jaký koaxiální kabel k televizi
Používáte ho pro připojení vašeho televizoru, set-top boxu nebo modemu – jde o propojení mezi zásuvkou s kabelovými službami a vaším zařízením. Pokud si budete pořizovat vlastní koaxiální kabel, měl by být nejméně dvojnásobně stíněný s impedancí (odporem) 75 Ohm a průměrem 5 mm.
Co je impedance kabelu
impedance (či: charakteristická impedance), měřená v Ohmech. Vyjadřuje odpor, který kabel klade střídavému proudu. Ve světě počítačů se používají nejčastěji koaxiální kabely s impedancí 50 Ohmů, zatímco například pro rozvody televizního signálu to jsou kabely s impedancí 75 Ohmů.
Jak zapojit televizi bez kabelu
Řešením je přivedení internetu pomocí powerline. Použijte powerline adaptér od TP-Link, který rozšíří internetovou síť snadno, rychle a hlavně bez vrtání. Stačí vám k tomu váš stávající elektrický rozvod, se kterým propojíte zařízení (modem, televizi…) pomocí powerline adapteru.
Jak naladit televizi přes kabel
Pro nové naladění vysílacích kanálů je třeba na přijímači spustit buď automatické ladění, nebo příslušný kanál naladit ručně. Směrovaní antény, ani její polohu není třeba upravovat, protože se nemění stanoviště vysílače ani polarizace antény.
Jak zjistit kudy vede kabel
Pomocí tzv. „semaforu“ – v případě nálezu elektrického vedení či kovu vás upozorní pomocí červeného světla. Pokud je vše v pořádku rozsvítí se zelené světlo. Ideální pro všechny domácí kutily.
Jak zjistit kam vede kabel
UNI-T UT682D Detektor vyhledávač kabelů ve svazku, nebo hledání kam kabel vede, vysílá signál do vodiče. UT682D- tester kabelů nabízí jednoduchý způsob, jak rychle najít a identifikovat kabely, dráty a svazky kabelů. Připojte přístroj ke kabelu a poté sledujte kabel a signál s pomocí sondy.
Jak zjistit první fází
Sled fází jde poměrně jednoduše změřit. Slouží k tomu specializované testery, nebo i obyčejná vadaska. Vadaska (zkoušečka napětí) je jinak nejmenší možná výbava při testování přítomnosti napětí – jednoduchým šroubovákům s doutnavkou (tzv. fázovka), případně displejem, nebo bezdotykovým testerům moc nevěřte.
Jak vypadá Nulák
Vodiče se dělí na fázový, ochranný a nulový. Každý z vodičů je označen svou typickou barvou. Fázový vodič má černou barvu, nulový je modrý a ochranný disponuje žlutozeleným zabarvením. Díky standardizaci je prakticky nemožné si jednotlivé vodiče splést.
Jaké programy chytnu na anténu
Přechodová síť 11 – provozuje Česká televize
Česká televize zároveň jako jediná větší televizní skupina nabízí všechny své programy v HD rozlišení. Vysílané programy: ČT 1, ČT 2, ČT 24, ČT Sport, ČT :D/ČT art (tyto programy vysílají volně v HD rozlišení).